Before proceeding with a flash, it is vital to confirm the device model. Flashing the wrong file can permanently damage the phone (hard brick).
You may need to flash your Nokia 105 TA-1304 in the following situations:
Turn off your Nokia 105 completely and remove the battery for 5 seconds, then reinsert it (do not power it on).
After your Nokia 105 TA-1304 restarts:
The phone does not boot up past the Nokia logo. Nokia 105 Ta 1304 Flash File Download
Type *#7370# on the home screen to restore factory settings. This requires the security code (default is 12345 ).
Remove the battery from the phone, wait 5 seconds, and reinsert it (do not turn the phone on).
Extract the downloaded Unisoc/Spreadtrum driver package on your PC. Run the setup file ( .exe ) corresponding to your Windows architecture (32-bit or 64-bit) and complete the installation wizard. Restart your computer. Step 2: Extract the Firmware and Flash Tool
Before you start the flashing process, make sure you have the following: USB Cable: A high-quality micro-USB cable. Before proceeding with a flash, it is vital
You have flashed an incorrect firmware version or a file meant for a different hardware revision. Find an updated or alternative TA-1304 PAC file and re-flash.
Flashing wipes all data (contacts, messages). If possible, back them up before starting.
Load the firmware into the tool:
: The tool will begin the flashing progress bar. Once finished, a "Success" message will appear, and the device will typically reboot automatically. How To Do Hard Reset in Nokia 105 - Factory Reset After your Nokia 105 TA-1304 restarts: The phone
Complete Guide to Nokia 105 (TA-1304) Flash File Download and Installation
: If the tool does not detect your phone, uninstall and reinstall the MTK USB drivers, switch to a different USB port (preferably on the back of the PC), or try a different USB cable.
Fixes display glitches caused by corrupted software.