The allows you to test power electronics circuits before building them. The IR2110 is a very popular gate driver chip. It controls high-side and low-side N-channel MOSFETs or IGBTs. By installing the right external library, you can add this missing chip to your Proteus Design Suite database. Why You Need the IR2110 Chip
: Capable of handling up to +500V offset voltage for the floating high-side channel.
Once the library is installed, it's wise to run a quick test to confirm that the model works correctly. Below is a simple half‑bridge test circuit you can build in Proteus.
Copy both the IR2110.LIB and IR2110.IDX files from your extracted download folder. ir2110 library for proteus 8 link
The IR2110 is a cornerstone component in modern power electronics, and having a reliable simulation model in Proteus 8 is essential for any engineer or hobbyist designing half‑bridge or full‑bridge driver circuits.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Search for repositories named "Proteus-Custom-Libraries" to find user-contributed component packages. Step-by-Step Installation Guide The allows you to test power electronics circuits
| IR2110 Pin | Typical Connection | Description | | :--- | :--- | :--- | | | +5V | Logic supply input. | | HIN | Microcontroller PWM output | Signal for the high-side MOSFET. | | SD | GND | Shutdown pin; tie to ground for normal operation. | | LIN | Microcontroller PWM output | Signal for the low-side MOSFET. | | VSS | GND | Logic ground. | | VB | Positive side of Bootstrap Cap (D1 Cathode) | High-side floating supply. | | HO | Gate of High-Side MOSFET (via R1) | High-side gate drive output. | | VS | Source of High-Side MOSFET / Drain of Low-Side MOSFET | High-side floating supply return. | | VC | +12V to +20V | Low-side supply. | | LO | Gate of Low-Side MOSFET (via R2) | Low-side gate drive output. | | COM | GND | Low-side return. |
Unzip the downloaded folder. You will typically see two vital files: IR2110Library.LIB (Contains the component data)
Double-check that you pasted the files into ProgramData , not the Program Files directory. Proteus 8 reads active libraries exclusively from the ProgramData path. By installing the right external library, you can
To verify the installation, try building a simple Half-Bridge circuit:
"I'm trying to simulate the IR2110 in proteus ISIS (is not modelled natively), then I've downloaded the model from infineon and followed the tutorial from labcenter to make the device..."
Copy both the .LIB and .IDX files from your unzipped folder and paste them directly into the Proteus LIBRARY directory. Step 4: Restart Proteus
The IR2110 is a high-voltage, high-speed driver with independent high and low side output channels. Using the high-low side driver IR2110 - Tahmid's blog