| Parameter | Value (Approx.) | |--------------------|-------------------| | Impedance | 4 Ω or 8 Ω variants | | Power Handling (RMS) | 80–120 W | | Peak Power | 200–250 W | | Sensitivity | 86–88 dB (1W/1m) | | Frequency Response | 35 Hz – 500 Hz | | Resonance (Fs) | ~42 Hz | | Qts | ~0.45 | | Vas | ~12 L | | Xmax | ±8 mm |
It runs warm . Not hot enough to worry, but definitely noticeable after an hour of high-gain listening. Also, the stock USB-C cable is a bit stiff—worth swapping for a braided one.
| Feature | Specification | | :--- | :--- | | | Teyun Q-22 | | Type | 2x2 USB Audio Interface | | Resolution | Up to 24-bit / 192kHz | | Connectivity | USB 2.0 (Type-C / Type-B port) | | Inputs | 2 x XLR/TRS Combo Jacks (Input 2 has HI-Z for guitar/bass) | | Outputs | 2 x 1/4" TRS Main Outputs (L/R), 1 x 1/4" Headphone Output | | Phantom Power | Yes, +48V (switchable) | | Frequency Response | 20Hz - 20kHz (±1dB) | | Dynamic Range | 82dB (A-weighted) | | THD+N | 0.03%, 1kHz | | Microphone Gain Range | +3dB to +60dB | | Line Input Gain | -10dB to +40dB (Inputs 1/2) | | Instrument Input (Input 2) | HI-Z, 1MΩ impedance, 0dB to +40dB gain | | Power | USB bus-powered or DC 5V | | Dimensions | 18 x 11.8 x 4.8 cm (7.1 x 4.6 x 1.9 in) | | Compatibility | Windows, macOS, iOS, Android | teyun q22 driver
While the device is generic, some sellers provide a generic "USB Audio" ASIO driver. Search for "Teyun Q22 driver download" to find sites offering a generic ASIO installer (often labeled as generic USB audio interface drivers). 3. Step-by-Step Setup Guide Follow these steps to connect and configure your Teyun Q22:
on YouTube to see how to bridge the gap between your hardware and your DAW. Are you having trouble getting your DAW to recognize inputs, or are you just looking for the official download | Parameter | Value (Approx
driver situation and how to actually get this thing recording without the headache. 1. The "Auto-Install" Reality is marketed as having an auto-install driver
Open the ASIO4ALL control panel in your DAW and increase the buffer size (e.g., to 256 or 512 samples). | Feature | Specification | | :--- |
Even though it is an affordable piece of studio gear, the interior hardware can handle standard high-resolution audio tracking.