Epson: M100 Resetter Adjustment Program Tool [top]

The Adjustment Program (also known as the Epson Adjustment Tool or Resetter) is proprietary maintenance software used by technicians. It communicates directly with the printer's firmware via a USB connection to perform internal maintenance, calibration, and eeprom counter resets. Key Features of the Tool

Use the Epson M100 Resetter Adjustment Program to reset the counter to zero.

To reset the waste ink pad counter on an Epson M100 printer using the Adjustment Program

If you reset the software counter multiple times without addressing the hardware, the waste ink will eventually overflow, potentially damaging your desk, floor, or internal printer circuitry. Your Options for Hardware Maintenance:

If you reset the digital counter multiple times without addressing the physical waste ink, the pads will overflow. This results in black ink leaking from the bottom of your printer, which can ruin furniture or short-circuit the printer's mainboard. How to handle the physical waste ink: epson m100 resetter adjustment program tool

The adjustment utility is designed exclusively for Windows operating systems (Windows 7, 8, 10, and 11). It does not run natively on macOS or Linux.

The program provides access to the printer's internal EEPROM settings, allowing for several critical maintenance tasks: wic-reset.com Waste Ink Pad Counter Reset

The adjustment program is more than just a simple reset utility. It typically offers a range of advanced features:

The primary function of this tool for everyday users is to . Once reset, the "Service Required" error disappears, the blinking lights stop, and the printer becomes immediately operational again. Step-by-Step Guide to Using the Epson M100 Resetter The Adjustment Program (also known as the Epson

Scroll down the maintenance list. Double-click on , then click OK .

Follow these instructions carefully. Always ensure your printer is connected to your computer via a USB cable, as most resetter tools do not support Wi-Fi connections. Then, proceed with the following steps:

Download the appropriate version of the resetter for your specific model from a trusted online source. Extract the downloaded ZIP or RAR file.

The software will prompt you with a message: "Please turn off the printer." Phase 4: Completing the Process To reset the waste ink pad counter on

This occurs if the firmware detected over the USB cable does not match the model profile selected in the program window. Ensure you selected the exact M100 profile and that you are not attempting to use an M200 or L-series resetter tool on an M100 unit.

Watch these tutorials for step-by-step guidance on downloading and using the Epson M100 resetter tool:

Connect the Epson M100 directly to your computer using a functional USB cable. Avoid using external USB hubs.

This occurs when the software cannot establish a clean data link with the machine. Ensure the printer is turned on, check your USB connection, close all pending print queues, and try switching to a different USB port.

Check the box next to Main Pad Counter , then click the Check button. The software will read your printer's firmware and display the current point accumulation and percentage.