Stenhoj Ds2 Manual [patched] Jun 2026

Specific torque ratings for heavy-duty expansion anchors must be followed strictly to prevent column tipping. Operating Instructions

Ensure all limit switches (top travel limit, bottom travel limit, and nut-break safety switches) are functioning cleanly. 5. Troubleshooting Common Stenhøj DS2 Issues Potential Cause Manual-Recommended Action Lift will not raise; motor hums but does not turn. Phase failure (3-phase power units) or blown fuse.

What is the printed on your lift's ID plate?

Inspect the safety nuts for wear (very important for electro-mechanical lifts). Check electrical connections.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. stenhoj ds2 manual

Before driving any vehicle onto the lift, perform a quick visual sweep:

Typically 3,000 kg (3 tonnes) to 3,200 kg (3.2 tonnes). Lifting Height: Approximately 1,900 mm to 2,000 mm.

He developed and produced one of the first car lifts ever made, transitioning from basic metalwork to precision garage equipment.

Position the four lifting arms under the vehicle manufacturer's designated lifting points. Inspect the safety nuts for wear (very important

The forum's search function will lead you to detailed technical discussions on:

Proper installation and regular maintenance are key to the longevity of any lift. The manual will provide exact specifications, but here are some general guidelines:

If your Stenhoj DS2 stops functioning correctly, consult this baseline troubleshooting framework before calling a service technician. The Lift Will Not Raise

The Stenhøj DS2 is a legendary workhorse in the automotive repair industry. Renowned for its Danish engineering, robust build quality, and electro-mechanical reliability, this two-post lift has been a staple in professional workshops and serious home garages for decades. Excessive Noise During Operation

Check for debris blocking one of the carriage rollers. Excessive Noise

Usually requires a minimum of 200mm depth of reinforced concrete (C25/30 grade).

Check if one side of the carriage is catching on a foreign object or lacks proper lubrication within the column tracks. Excessive Noise During Operation