operates with dual-control functionality to ensure a consistent and safe showering experience :
If pressure drops below a trickle, the internal regulator is clogged.
The hot water supply must connect strictly to the inlet marked HOT (H) , and the cold water supply must connect to the inlet marked COLD (C) . Step 2: Mounting the Valve Body Caraflo V200
: Turn on your water heater (Gas or Electric) and allow it enough time to reach the desired temperature. Adjust Water Flow Single Lever Models
Before beginning any installation or troubleshooting, ensure your system meets the operational requirements of the Caraflo V200: 0.1 Bar (Gravity-fed systems) Maximum Operating Pressure: 5.0 Bar
If you prefer to leave the valve mounted, you must use the specialized drain-down key included with the kit.
To increase the temperature past 38°C for a hotter shower, you must while turning the knob. This prevents children or vulnerable users from accidentally scalding themselves. ❄️ Winterization and Drain-Down Instructions (Critical)
To prevent damage from freezing during the winter, you must use the supplied drain-down key to empty the water from the internal thermostatic valve.
You can reduce the flow at any time by turning the bottom flow control valve partially clockwise. The thermostatic valve will continue to maintain the temperature you set.