The is a dual-circuit industrial water chiller specifically designed for cooling 6kW fiber laser systems. It features two independent temperature control systems to cool the laser source and the optics (QBH connector) simultaneously. Manual Access & Key Topics
Ultra-high water temperature alarm (check heat load or compressor).
The CWFL-6000 utilizes an intelligent dual-channel temperature controller. By default, it is set to , meaning the water temperature automatically adjusts based on changes in the ambient room temperature.
This comprehensive guide serves as an expanded operational manual, detailing technical specifications, installation steps, temperature controller programming, and troubleshooting protocols. 1. Technical Specifications & Performance Data cwfl-6000 manual
Use purified or distilled water to prevent scale buildup. Change the water every 3–6 months depending on your environment. 4. Decoding the Alarms
By respecting the intelligence engineered into the CWFL-6000 and following its manual diligently, you will maximize uptime, protect your laser investment, and cut parts with precision for years to come.
Before powering on your CWFL-6000, ensure the following environmental conditions are met: The is a dual-circuit industrial water chiller specifically
on startup, your 3-phase wiring order is incorrect and needs adjustment. Air Purge:
Ensure all connections are tightly sealed with pneumatic fittings or hose clamps to prevent micro-leaks near sensitive high-voltage laser components. 4. Electrical and Wiring Instructions
Before operating the CWFL-6000, familiarize yourself with its physical and electrical requirements to ensure a safe installation environment. or cleaning machine
The CWFL-6000 features color-coded, labeled inlets and outlets at the rear of the machine:
Open the water filler cap and fill the tank with purified water or deionized water, filling up to the green level of the level gauge.
Operating ambient temperature should be between 5°C and 40°C. Operating above 43°C will trigger ultrahigh room temperature alarms.
The Teyu S&A CWFL-6000 is a dual-circuit industrial water chiller engineered specifically for cooling 6kW (6000W) fiber laser systems. Whether you are operating a high-power fiber laser cutter, welder, or cleaning machine, maintaining optimal temperature control is vital for maximizing laser lifespan and ensuring clean cuts.