Keep holding the button for 3 to 5 seconds after plugging it in, then release it.
Instead of the rescue file, copy the latest firmware file (e.g., lighthouse_tx_htc_2.0-436-2016-09-20.bin or newer) from the same folder into the drive. Power cycle the base station. Troubleshooting: When the Rescue Fails
The ...calibration-rescue-244.bin file re-flashes the base station, often specifically addressing the calibration data, allowing the unit to re-initialize and communicate with SteamVR again.
Locate the small, recessed on the back of the unit.
While holding the button, plug the Micro-USB cable into the base station and connect it to your PC. lighthouse-tx-htc-2-0-calibration-rescue-244.bin
Locate the on the back of the device (a small recessed button near the power port). Locate the Micro-USB port hidden on the back of the device. Step 2: Boot into Bootloader Mode (CRP Disabld)
base stations that have failed after a firmware update or developed internal faults (such as Fault 02).
Prevent the need for rescue by never interrupting a base station firmware update, keeping stations on a UPS (uninterruptible power supply), and avoiding cross‑brand firmware experiments.
The most common reason a user will be searching for this file is that they have tried to update their base station's firmware via SteamVR, and something has gone wrong. Keep holding the button for 3 to 5
Disconnect the USB and power cables, then reconnect only the power cable. Verification The base station will rapidly flash LED colors. Green Flash
: The rescue succeeded. You must now repeat the steps above but use the latest standard firmware file (e.g., lighthouse_tx_htc_2_0-436-2016-09-20.bin ) to fully restore functionality.
It is most commonly used when a base station is stuck with a blinking red light, which typically indicates a critical system or laser error. Recovery Mechanism: By manually loading this
After completing Stage 2, the base station's LED should behave normally. To confirm it is working: Troubleshooting: When the Rescue Fails The
(if possible)
The file is a specialized firmware rescue file used to repair corrupted HTC Vive Base Station 2.0 units (Lighthouse trackers). When a SteamVR Base Station 2.0 suffers a firmware crash or a critical update failure, it often blinks a red error light and becomes completely unresponsive. This guide provides a comprehensive breakdown of why this file is needed, how to safely deploy it, and how to revive your virtual reality tracking hardware. Understanding the Base Station 2.0 Failure
Article last updated: October 2025. This file is not endorsed by HTC or Valve. Use at your own risk.
Unplug the power adapter from the back of the malfunctioning Base Station 2.0. Remove the unit from its wall mount to ensure you can work with it safely on a flat desk. Step 2: Access the CRP DISABLD Storage Mode